Door Switch
DS 013

  • Tool-free adjustable switch positioning
  • High switching capacity
  • Strain relief, suitable for range of cable diameters
  • Suitable for lamp LED 025 and other devices

The door switch monitors the position of cabinet doors and is available in three versions. For example, it can be used for switching a light when opening a door (NC), or to activate a fan when closing a door (NO). The version with change-over contact (CO) can be used as a normally closed and/or normally open contact. The wide mechanical adjustment range of the door switch DS 013 offers versatile mounting: the housing is adjustable within a 1-3/8" (35 mm) range, while the screw flange with a slotted hole offers an additional 13/16" (21 mm). The travel of the switch itself is another 5/16" (8 mm).

Max. switching capacity8 A resistive / 1.5 A inductive @ AC 250 V
Service lifeVDE: > 10,000 cycles
UL: > 6,000 cycles
Connection4-pole clamp with strain relief, clamping torque 0.5 Nm max.
Housingplastic according to UL 94V-0, grey/black
MountingM5 screws (not included)
Mounting positionvariable
Operating / Storage temperature-4 to +185 °F (-20 to +85 °C)
Operating / Storage humiditymax. 90 %RH (non-condensing)
Dimensions3.4 x 2.5 x 1.2" (87 x 64 x 30 mm)
Weightapprox. 1.8 oz. (50 g)
Protection typeIP20
ApprovalsVDE, EAC; UL intended

To top

Part No.ModelSuitable wire
01350.0-00change-over (CO)Round cable, stranded wire (with wire end ferrule) AWG 18 to 17 (0.75 mm² to 1 mm²)
01351.0-00normally closed (NC)Round cable, stranded wire (with wire end ferrule) AWG 18 to 16 (0.75 mm² to 1.5 mm²)
01352.0-00normally open (NO)Round cable, stranded wire (with wire end ferrule) AWG 18 to 16 (0.75 mm² to 1.5 mm²)

To top

Dimensioned Drawing

Door Switch DS 013

To top