Vent Plug
DA 084

  • High degree of protection (IP55)
  • Easy to install

It has become increasingly important to provide a protected enclosure environment for valuable and crucial electrical and electronic components. In a tightly closed enclosure, pressure differentials can occur during extreme temperature variations, such as day/night operation. When this occurs, the risk of dust and humidity ingression into the control panel increases dramatically. The specially designed DA 084 vent plug permits a controlled change in pressure and can easily be installed in any enclosure. The vent plug is suitable for the use in enclosures and electrical cabinets in accordance with DIN EN 62208.

 

Technical Data

Download PDF                       Download CAD Drawing

MountingPG 29 thread with union nut
Torque5 Nm
Mounting positionvertical1
Materialplastic, UL 94V-0, light grey
weather proof and UV light resistant according to UL746C (f1)
SealingNBR gasket
Air InterfaceApprox. 1.5 cm²
Operating / Storage temperature-49 to +158 °F (-45 to +70 °C)
DimensionsØ 2.58" x 1.2” (Ø 65.5 x 30.5 mm)
ApprovalsEAC

1 Protection type is restricted to IP54 if mounting position is not vertical

To top

Installation
A hole with a diameter of 1.46” (37 mm) is required for mounting. Make sure that the sealing gasket is placed on the outer side panel of the enclosure. For optimal pressure compensation, it is recommended to use two devices on opposite sides towards the top of the enclosures.

To top

Part No.Protection typeWeight (approx.)
08400.9-01IP551.1 oz. (31 g)

To top

Dimensioned Drawing

DA 084 Vent Plug

To top