Filter Fan
FF 018 | 202 cfm

  • Minimal mounting depth
  • High air volume
  • Functional design
  • Time-saving installation
  • UV resistant plastic

Filter fans are used to provide an optimum climate in enclosures. The interior temperature of an enclosure can be reduced by channeling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting air flow prevents formation of localized heat pockets and protects the electronic components from overheating. Four integrated axial fans provide a particularly high and uniform air circulation which contributes to higher reliability. These filter fans are intended for indoor use. The plastic used for the hood is highly UV light resistant.

Axial fan, ball bearingservice life min. 50,000 h at 77 °F (25 °C) and 65 %RH
aluminum fan body, plastic rotor
Connection3-pole clamp, AWG 14 (2.5 mm²), clamping torque 0.8 Nm max.
Housing (filter fan and exhaust filter)plastic, UL 94V-0, light grey
Hood (filter fan and exhaust filter)plastic, UL 94V-0, light grey;
UV light resistant according to UL 746C (f1)
Mounting framewith double-sided industrial adhesive for mounting to the
outside of enclosure; certain operating circumstances may
make the additional use of screws necessary; cut-out
template included
Filter media ratingG4 acc. to DIN EN 779, filtering degree 94%
Filter materialsynthetic fiber with progressive construction, temperature
resistant to 212 °F, self-extinguishing class F1;
moisture resistant to 100 %RH, reusable - can be cleaned by
washing or vacuuming
Operating / Storage temperature+14 to +158 °F (-10 to +70 °C) / -40 to +158 °F (-40 to +70 °C)
Operating / Storage humiditymax. 90 %RH (non-condensing)
Protection classI (grounded)
ApprovalsUL File No. E234324 (all), EAC, VDE (AC 230 V only)

Filter Fan FF 018

Part No.Operating voltageAir volume, free blowingAir volume with exhaust filterCurrent consumptionPower consumptionAverage noise level (DIN EN ISO 4871)Mounting depthEnclosure cut-outWeight (approx.)Protection type
01803.0-00AC 230 V, 50 Hz¹177 cfm (300 m³/h)135 cfm (230 m³/h)400 mA68 W56 dB (A)2.6” (65 mm)9.8 x 9.8”7.3 lbs. (3.3 kg)IP54², UL Type 12
01803.0-01AC 120 V, 60 Hz202 cfm (345 m³/h)156 cfm (265 m³/h)800 mA68 W56 dB (A)2.6” (65 mm)9.8 x 9.8”7.3 lbs. (3.3 kg)IP54², UL Type 12

¹ air volume increases by 15% when operating AC 230 V filter fans at 60 Hz; ² according to VDE

To top

Exhaust Filter EF 118

Part No.Mounting depthEnclosure cut-outWeight (approx.)Filter matProtection type
11803.0-000.9” (22 mm)9.8 x 9.8”2.2 lbs. (1.0 kg)G4 acc. to DIN EN 779, filtering degree 94%IP54²

² according to VDE

Filter Mats FM 086

Filter mat9.7 x 9.7” (247 x 247 mm)
G4 (1 packing unit = 3 pcs.)Part No. 08608.0-00

To top

Dimensioned Drawing

Filter Fan FF 018

To top