- Compact design
- Built-in overheat protection
- Integrated adjustable thermostat or fixed hygrostat
- Double insulated plastic housing
- Panel or DIN rail mounting
The compact CR 130 high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures. This fan heater is available with an integrated thermostat for temperature control or a pre-set hygrostat for humidity control. The CR 130 was designed as a stationary unit for panel or DIN rail mounting. For foot mounting on the bottom of an enclosure, the CR 030 fan heater is recommended.
| Heating element | High performance cartridge heater |
|---|---|
| Overheat protection | with automatic reset and second-tier one shot fuse |
| Heater body | extruded aluminum |
| Axial fan, ball bearing | Service life 50,000 h at 77 °F (25 °C) |
| Air flow, free blowing | 94 cfm (160 m³/h) |
| Connection | 2-pole terminal AWG 16 max. (1.5 mm²) with strain relief, clamping torque 0.8 Nm max. |
| Housing | plastic, UL 94V-0, black |
| Mounting | clip for 35 mm DIN rail, EN 60715 or M6 screws (not included) |
| Mounting position | vertical airflow (air outlet up) |
| Operating1 / Storage temperature | -49 to +158 °F (-45 to +70 °C) |
| Operating / Storage humidity | max. 90 %RH (non-condensing) |
| Dimensions | 3.9" x 6.6" x 7.2" (99 x 168 x 182 mm) |
| Weight | approx. 3.1 lbs. (1.4 kg) |
| Protection class / Protection type | II (double insulated) / IP20 |
1 Operating temperature of heater with integrated hygrostat: +32 to +140 °F (0 to +60 °C)
| Part No. | Heating capacity | Operating voltage | Recommended pre-fuse T (time-delay) | Setting range2 | Approvals | ||
|---|---|---|---|---|---|---|---|
| 13051.0-00 | 950 W | AC 230 V, 50/60 Hz | 6.3 A | 0 to 60 °C | UL File No. E234324 | VDE | EAC |
| 13051.0-02 | 950 W | AC 230 V, 50/60 Hz | 6.3 A | 65 %RH, factory-set | UL File No. E234324 | VDE | EAC |
| 13051.0-03 | 950 W | AC 230 V, 50/60 Hz | 6.3 A | none (no integrated controls) | UL File No. E234324 | VDE | EAC |
| 13059.9-00 | 950 W | AC 120 V, 50/60 Hz | 10.0 A | 32 to 140 °F | UL File No. E234324 | - | EAC |
| 13059.9-02 | 950 W | AC 120 V, 50/60 Hz | 10.0 A | none (no integrated controls) | UL File No. E234324 | - | EAC |
² Switching difference 12.6 °F ± 7 °F tolerance (7 K ± 4 K)
Dimensioned Drawing (Please note change below!)
- www.stego-usa.com>
- Products>
- Heating>
- Fan Heaters>
- CR 130 | 950W (Panel or DIN rail mounting)
