Flat Heater
CP 061 | 50 W, 100 W

  • Contact/Convection Heater
  • Ultra flat design
  • Compact
  • Easy, firm installation
  • Screw fixing
  • Linear expansion compensation
  • Integrated temperature cut-out
  • Ready-to-use with strain relief

The Flat Heater CP 061 is used to provide evenly distributed temperature within enclosures and cabinets with electric/electronic components. Its ultra-thin design makes it particularly suitable for high-density applications in which standard enclosure heaters are often too big. Depending on the application, the Flat Heater can be used as a convection heater or as a contact heater. When used as a contact heater it offers thermoconductive contact to a component or a cabinet wall. Additionally, a mounting system especially designed for the CP 061 allows for the compensation of an expansion of the heater body as a result of the heating-up when in operation. Operated as a convection heater, the slim heater CP 061 warms up the ambient air within a cabinet. The CP 061 is designed for continuous operation.

Heating elementresistance heater
Overheat protectionwith automatic reset
Heating bodyaluminum profile
Surface temperaturemax. +302 °F (+150 °C) at +77 °F (+25 °C)
Connectionsilicone cable (halogen-free) 3 x AWG 18 (0.75 mm²),
length 3 ft (1 m)
Housingplastic, UL 94V-0, black
Mountingscrew mount (M6)
Mounting positionhorizontal, variable connection or
vertical, connection on bottom
DimensionsL x 4" x .32" (L x 100 x 8 mm)
Operating / Storage temperature-40 to +140 °F (-40 to +60 °C) / -40 to +185 °F (-40 to +85 °C)
Operating / Storage humiditymax. 90% RH (non-condensing)
Protection type/Protection classIP30 / I (earthed)
Noteother voltages (AC 120 V) available upon request
Part No.Operating voltageHeating capacityLength (L)Hole Spacing (X)Weight approx.Approvals
06100.0-00AC 230 V, 50/60 Hz50 W9.41" (239 mm)8.9" (225 mm).88 lbs (0.4 kg)VDEEAC
06101.0-00AC 230 V, 50/60 Hz100 W16.3" (414 mm)15.75" (400 mm)1.54 lbs (0.7 kg)VDEEAC

Dimensioned Drawing

Flat Heater CP 061