Touch-Safe PTC Heater
CS 060| 50 W to 150 W

  • Low surface temperature
  • Compact size
  • Wide voltage range
  • Double insulated protection
  • DIN rail mountable

The CS 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air. The surface temperatures on the accessible side surfaces of the housing are minimized as a result of the heater design. The CS 060 is also available in a version with a plug-in thermostat requiring no additional wiring (CSF 060). These heaters are suitable for permanent operation.

Operating voltage1AC/DC 120-240 V (min. 110 V, max. 265 V)
Heating elementPTC resistor, temperature limiting
Surface temperature< 176 °F (80 °C), except upper protective grill
Connection4-pole terminal AWG 14 max (2.5 mm²), torque 0.8 Nm max.
Housingplastic, UL 94V-0, black
Mountingclip for 35 mm DIN rail, EN 60715
Mounting positionvertical airflow (air outlet up, connection on bottom)
Operating / Storage temperature-49 to +158 °F (-45 to +70 °C)
Operating / Storage humiditymax. 90 %RH (non-condensing)
Protection class / Protection typeII (double insulated) / IP20
ApprovalsUL File No. E150057, VDE, EAC
Noteother voltages available upon request

1 Operating high voltage heaters below AC/DC 140 V reduces heating performance by approx. 10%.

To top

Part No.Heating capacity²Max. current (inrush)Recommended
pre-fuse T (time-delay)
Air outlet temperature3DimensionsWeight (approx.)
06000.0-0050 W2.5 A2.5 A187 °F (86 °C)4.3 x 2.36 x 3.54” (110 x 60 x 90 mm)10.4 oz. (295 g)
06010.0-00100 W4.5 A4.5 A248 °F (120 °C)4.3 x 2.36 x 3.54” (110 x 60 x 90 mm)10.6 oz. (300 g)
06020.0-00150 W8 A8 A293 °F (145 °C)5.9 x 2.36 x 3.54” (150 x 60 x 90 mm)15.5 oz. (440 g)

2 see Heating Power / Ambient Temperature diagram; 3 measured 2” (50 mm) above protective grill;

To top

Dimensioned Drawing

CS 060 Touch-Safe PTC Heater

To top