- Low surface temperature
- Compact size
- Wide voltage range
- Double insulated protection
- DIN rail mountable
The CSK 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air. The surface temperatures on the accessible side surfaces of the housing are minimized as a result of the heater design. This heater is suitable for permanent operation.
Heating element | PTC resistor, temperature limiting |
---|---|
Surface temperature | < 185 °F (85 °C), except upper protective grill |
Connection | 2-pole terminal AWG 14 max (2.5 mm²), torque 0.8 Nm max. |
Mounting | clip for 35 mm DIN rail, EN 60715 |
Housing | plastic, UL 94V-0, black |
Mounting position | vertical airflow (air outlet up, connection on bottom) |
Operating / Storage temperature | -49 to +158 °F (-45 to +70 °C) |
Operating / Storage humidity | max. 90 %RH (non-condensing) |
Dimensions | 3.86 x 2.95 x 1.5” (98 x 75 x 38 mm) |
Protection class / Protection type | II (double insulated) / IP20 |
Approvals | UL File No. E150057, VDE, EAC |
Note | other voltages available upon request |
Part No. | Operating voltage¹ | Heating capacity² | Max. current (inrush) | Recommended pre-fuse T (time-delay) | Weight (approx.) |
---|---|---|---|---|---|
06030.0-00 | AC/DC 120-240 V | 20 W | 2.5 A | 4.0 A | 6.1 oz. (170 g) |
06040.0-00 | AC/DC 120-240 V | 10 W | 1.0 A | 2.0 A | 5.0 oz. (140 g) |
¹ (min. 110V, max 265V) operating high voltage heaters below AC/DC 140V reduces heating performance by approx. 10 %; ² at 68 °F (20 °C) ambient temperature;
- www.stego-usa.com>
- Products>
- Heating>
- Heaters>
- CSK 060 | 10W - 30W