- High DC switching capacity
- Variety of applications
- Wide DC voltage range
- Simple connection
The DCM 010 is used to control DC powered devices with high capacities in control and switch cabinets. It is controlled via an external potential-free contact (thermostat or hygrostat), which is connected between terminal 3 and 4. It must be ensured that the external contact is suitable to switch the required signal current without any problems.
| Contact type | NO - normally open (MOSFET) |
|---|---|
| Service life | > 100,000 cycles |
| Operating voltage | DC 20 to 56 V |
| Control contact – signal current | 3 mA at DC 20 V / 4.5 mA at DC 24 V 14 mA at DC 48 V / 17 mA at DC 56 V |
| Connection | 6-pole terminal: stranded wire1 AWG 16 (1.5 mm²); max. AWG 12 (2.5 mm²) |
| Mounting | clip for 35mm DIN rail, EN 60715 |
| Housing | plastic, UL 94V-0, grey (bicolor) |
| Dimensions | 3.7 x 2.1 x 1.7" (93 x 53 x 44 mm) |
| Weight | approx. 2.3 oz. (65 g) |
| Mounting position | vertical |
| Operating temperature | see article table below |
| Storage temperature | -40 to +176 °F (-40 to +80 °C) |
| Operating/Storage humidity | max. 90 % RH (non-condensing) |
| Protection type | IP20 |
| Approvals | UL File No. E342261, VDE, EAC |
| Note | other versions on request |
1 When connecting with stranded wires, wire end ferrules must be used.
| Part No. | Max. switching capacity (relay output) | Operating temperature |
|---|---|---|
| 01010.0-00 | DC 15 A | -40 °F to +104 °F (-30 °C to +40 °C) |
| 01010.0-10 | DC 13 A | -22 °F to +122 °F (-30 °C to +50 °C) |
| 01010.0-20 | DC 11 A | -22 °F to +140 °F (-30 °C to +60 °C) |
Dimensioned Drawing
- www.stego-usa.com>
- Products>
- Regulating>
- Regulators>
- DCM 010 | Switch Modul/Relay (DC 20 V to 56 V)
