- 16 Amp DC switching capacity
- Low hysteresis
- Wide adjustment range
- DIN rail mountable
The ET 011 is an electronic thermostat for regulating high performance DC 24 V equipment. Heating or cooling equipment, as well as signal devices, can be switched via the SPDT (change-over) contact. A relatively small hysteresis sets the ET 011 Thermostat apart from less accurate mechanical thermostats.
Technical Data
| Switching difference | 5.4 °F (3 K) ±1.8 °F (1 K) tolerance at +68 °F (+20 °C) |
|---|---|
| Sensor element | PTC |
| Contact type | SPDT / change-over contact |
| Service life | > 100,000 cycles |
| Max. switching capacity | 16 A @ DC 28 V |
| Max. inrush current | DC 16 A |
| Connection | 5-pole terminal, clamping torque 0.5 Nm max.: solid wire - AWG 14 max. (2.5 mm²) stranded wire1 - AWG 16 max. (1.5 mm²) |
| Housing | plastic, UL 94V-0, light grey |
| Mounting | clip for 35 mm DIN rail, EN 60715 |
| Mounting position | vertical |
| Operating / Storage temperature | -40 to +140 °F (-40 to +60 °C) / -49 to +176 °F (-45 to +80 °C) |
| Operating / Storage humidity | max. 90 %RH (non-condensing) |
| Dimensions | 2.6 x 2.0 x 1.8” (67 x 50 x 46 mm) |
| Weight | approx. 2.4 oz. (70 g) |
| Protection type | IP20 |
| Approvals | EAC |
¹ When connecting with stranded wires, wire end ferrules must be used.
| Part No. | Operating voltage | Setting range |
|---|---|---|
| 01190.0-00 | DC 24 V (DC 20-28 V) | 0 to 60 °C |
| 01190.0-01 | DC 24 V (DC 20-28 V) | 32 to 140 °F |
Dimensioned Drawing
- www.stego-usa.com>
- Products>
- Regulating>
- Regulators>
- ET 011 | Electronic Thermostat (DC 24 V)
