Electronic Thermostat
ETR 011

  • Large setting range
  • Compact design
  • Small hysteresis
  • Optical function display (LED)
  • DIN rail mountable

The ETR 011 electronic thermostat is used for controlling heating and cooling equipment, filter fans or signal devices. The thermostat senses the surrounding air temperature and can switch both resistive and inductive loads via an SPDT contact. The integrated LED is lit when the NC is closed (i.e. connected heater is operating).

Switching difference7 °F (4 K) ±1.8 °F (1 K) tolerance at +68 °F (+20 °C)
Sensor elementNTC
Reaction timeapprox. 5 seconds
Contact typeSPDT / change-over contact (relay)
Service life> 50,000 cycles
Max. switching capacity (relay output)8 A resistive / 1.6 A inductive @ AC 120 V
8 A resistive / 1.6 A inductive @ AC 240 V
100 W @ DC 24 V
Max. inrush currentAC 16 A for 10 sec.
Connection5-pole terminal, clamping torque 0.5 Nm max.:
solid/stranded1 wire - AWG 14 max. (2.5 mm²)
Housingplastic, UL 94V-0, light grey
Mountingclip for 35 mm DIN rail, EN 60715
Mounting positionvertical
Operating / Storage temperature-40 to +185 °F (-40 to +85 °C)
Operating / Storage humiditymax. 90 %RH (non-condensing)
Dimensions2.54 x 1.65 x 1.5” (64.5 x 42 x 38 mm)
Weightapprox. 2 oz. (60 g)
Protection typeIP20

To top

¹ When connecting with stranded wires, wire end ferrules must be used.

Part No.Operating voltageSetting range                        Approvals
01131.0-00AC 230 V, 50/60 Hz-20 to +60 °CUL File No. E164102VDEEAC
01131.9-00AC 120 V, 50/60 Hz-4 to +140 °FUL File No. E164102VDEEAC

To top

Dimensioned Drawing

Electronic Thermostat ETR 011

To top