- Compact design
- Fixed set point
- Color coded modules
- DIN rail mountable
Tamperproof (Pre-set) Thermostat NC (normally closed): Thermostat opens on temperature rise (red module housing) - for regulating heaters or for switching signal devices when temperature has fallen below the minimum value.
Tamperproof (Pre-set) Thermostat NO (normally open): Thermostat closes on temperature rise (blue module housing) - for regulating filter fans, heat exchangers, cooling devices or for switching signal devices when temperature limit has been exceeded.
| Sensor element | thermostatic bimetal |
|---|---|
| Contact type | snap-action contact |
| Service life | > 100,000 cycles |
| Max. switching capacity | 10 A resistive / 2 A inductive @ AC 120 V 5 A resistive / 1.6 A inductive @ AC 250 V DC 30 W |
| Max. inrush current | AC 16 A for 10 sec. |
| Connection | 2-pole terminal, clamping torque 0.8 Nm max.: solid/stranded1 wire - AWG 14 max. (2.5 mm²) |
| Housing | plastic, UL 94V-0, light grey |
| Mounting | clip for 35 mm DIN rail, EN 60715 |
| Mounting position | vertical |
| Operating / Storage temperature | -40 to +176 °F (-40 to +80 °C) / -49 to +176 °F (-45 to +80 °C) |
| Operating / Storage humidity | max. 90 %RH (non-condensing) |
| Dimensions | 1.85 x 1.3 x 1.3” (47 x 33 x 33 mm) |
| Weight | approx. 0.8 oz. (23 g) |
| Protection type | IP20 |
| Approvals | UL File No. E164102, VDE, EAC |
¹ When connecting with stranded wires, wire end ferrules must be used.
| Part No. | Contact | Switch-off temperature | Switch-on temperature |
|---|---|---|---|
| 01160.0-00 | NC - open on rise | 59 °F / 15 °C (± 9 °F / 5 K tolerance) | 41 °F / 5 °C (± 9 °F / 5 K tolerance) |
| 01160.0-01 | NC - open on rise | 77 °F / 25 °C (± 9 °F / 5 K tolerance) | 59 °F / 15 °C (± 9 °F / 5 K tolerance) |
| 01160.0-05 | NC - open on rise | 50 °F / 10 °C (± 9 °F / 5 K tolerance) | 32 °F / 0 °C (± 9 °F / 5 K tolerance) |
| Part No. | Contact | Switch-on temperature | Switch-off temperature |
| 01161.0-00 | NO - close on rise | 122 °F / 50 °C (± 12.6 °F / 7 K tolerance) | 104 °F / 40 °C (±11 °F / 6 K tolerance) |
| 01161.0-01 | NO - close on rise | 140 °F / 60 °C (± 12.6 °F / 7 K tolerance) | 122 °F / 50 °C (± 12.6 °F / 7 K tolerance) |
| 01161.0-02 | NO - close on rise | 95 °F / 35 °C (± 12.6 °F / 7 K tolerance) | 77 °F / 25 °C (±11 °F / 6 K tolerance) |
Note: Other switch-off and switch-on temperatures on request.
Dimensioned Drawing
- www.stego-usa.com>
- Products>
- Regulating>
- Regulators>
- FTO 011 / FTS 011 | Heating / Cooling, Tamperproof
